Stacks Image 99
Stacks Image 101
Stacks Image 103

The link below will take you to the project registration form at the Otago Centre for Confocal Microscopy. You will need to register before you can use any of the following equipment:

  • Confocal Microscope
  • Light Microscope
  • X-Ray µCT
  • Montaging Microscope
  • Stereology Microscope

Note: You are not permitted to use any of the equipment unless you have been trained to a suitable level and understand any health and safety issues associated with each item. You will not be expected to remember everything after one training session; a staff member will be available to assist you at most times. When you have shown you are competent at using an item of equipment, you may be allowed after-hours access to the facility.

Before you leap into the project registration process, please click on the glaring red button on the left to read the Terms and Conditions of using the facility. We know, you can pretend to read them and click the acknowledgment button on the registration form. But if you break something, wouldn't you like to know if you'll be paying for it or not ...

NOTE: If you register to use the Nikon A1R Resonant Confocal microscope, you either need to be associated with one of the approved laboratory groups, or have approached Andrew McNaughton in the first instance. This is not a general use confocal microscope and caters to specialised requirements.